porno

Fractal Design Kelvin AIO Water Coolers Revealed



/ 2 years ago

fractal_design_kelvin_lineup_banner

Have you been eager to get your hands on a new CPU water cooler? Then you may want to check out these lovely new models from Fractal Design. The new Kelvin series features an expandable all-in-one water cooling loop design. There are three sizes available to suit your build, with 120mm, 240mm and 360mm radiators making up the range.

The Kelvin coolers feature “silent operation”, and a high performance ceramic pump which is said to be strong enough to support “considerable expansion” and that’s very good news indeed. You can start out with the CPU cooler component, but when you’re feeling the need for more, you could easily add GPU blocks or extra radiators into the loop.

All models are constructed from enthusiast class components. The CPU block and the radiator are made from pure copper and the whole unit requires zero maintenance, making them a friendly option for water cooling first-timers.

  • The strong pump and the full-copper construction places the Kelvin Series water cooling system ahead of the pack in cooling performance.
  • Easily Expandable system. Just open it up to get the full benefits of custom water cooling, with the ability to add any parts you want to the loop.
  • High pressure pump provides impressive water flow rates even when an additional CPU or GPU water block or an additional radiator has been added to the loop.
  • All parts have fully standard G 1/4″ thread fittings for compatibility with the vast majority of enthusiast water cooling products.
  • The tubes are fastened with two-part brass compression fittings, providing a secure seal while being easy to open and re-seal with a standard wrench.
  • Easy refilling with dedicated fill port
  • Made with enthusiast-grade components in cooperation with Alphacool
  • Available with a triple fan radiator, a 30mm thick 360, providing a much larger area than nearly all other pre-filled water cooling units
  • Also available in the two most common formats: thin 240mm and thick 120mm
  • Long lifetime.
  • To avoid Galvanic corrosion of the water cooling loop, the Kelvin Series water cooling system is constructed with pure copper in both the radiator and the water block, along with brass fittings.
  • The strong pump and the full-copper construction places the Kelvin Series water cooling system ahead of the pack in cooling performance.
  • Easily Expandable system. Just open it up to get the full benefits of custom water cooling, with the ability to add any parts you want to the loop.
  • High pressure pump provides impressive water flow rates even when an additional CPU or GPU water block or an additional radiator has been added to the loop.
  • All parts have fully standard G 1/4″ thread fittings for compatibility with the vast majority of enthusiast water cooling products.
  • The tubes are fastened with two-part brass compression fittings, providing a secure seal while being easy to open and re-seal with a standard wrench.
  • Easy refilling with dedicated fill port
  • Made with enthusiast-grade components in cooperation with Alphacool
  • Available with a triple fan radiator, a 30mm thick 360, providing a much larger area than nearly all other pre-filled water cooling units
  • Also available in the two most common formats: thin 240mm and thick 120mm
  • Long lifetime.
    • To avoid Galvanic corrosion of the water cooling loop, the Kelvin Series water cooling system is constructed with pure copper in both the radiator and the water block, along with brass fittings.
    • To avoid the common issue of most pre-filled water cooling units (that tend to lose, over time, performance due to water loss in the tubes), Fractal Design equipped the Kelvin series with a fill dedicated port

The 120mm T12, S24 and S36 have an MSRP of USD $99.99, $119.99 and $139.99 respectively.

untitled-1

Thank you Guru3D for providing us with this information.

Images courtesy of Guru3D.


Topics: , , , , , , ,