Latest Plextor Memory Products at Computex 2014
Chris Hadley / 2 years ago
Next up on our tour of Computex 2014 we’re taking some time out to have a look at Plextor’s storage products to hit the consumer market. As we know from our look at the SSD market over the last few months, there has been a massive revelation in the performance of solid state storage with the new M.2 or NGFF (Next Gen Form Factor) drives that have the capacity to push past the limitations of traditional SATA based drives.
The first drive that we come across is one that we’ve already had a closer look at. Built to run on a PCIe interface the M6e is on of only a few PCIe drives that are available on the consumer market, delivering speeds that are far greater than that of any SATA interface and not requiring any more than a basic amount of knowledge to get them up and running.
Although the M6e, as we saw it in our review, is mainly built on to a PCIe platform, the drive itself is actually a separate component with the card itself simply acting as an interface adaptor. As the latest breed of Z97 motherboards rolls out across the land, users are able to take hold of the M.2 generation of drives, building systems that perform better and faster than before.
In a display cabinet to the side of the running samples shows each of the capacities that the drive is available in as well at the performance figures in both a PCIe format and a native M.2 format.
Further along from the M6e variant of Plextor’s M.2 drives we find three pure M.2 drives on offer, the key difference between each of them being the length and thus the maximum capacity that each drive can hold.
Moving along from the M.2 drives and over to native SATA, the M6Pro, bar a lower set of read and write speeds, is inherently the same drive. Using the same controller and NAND packages, the M6Pro comes in capacities ranging from 128GB right up to 1TB, but what is particularly interesting with these drives is the addition of Plextor’s own PlexTurbo technology. Acting in a similar fashion to that of Intel’s Smart Response, PlexTurbo uses the host systems memory along with the NAND in the drive to create a drive cache that loads at the start of each system boot, giving a stronger level of performance that a standard SSD. The M6Pro is dubbed for release later this year and we’ll be sure to check this drive out when it arrives.
The last drive that we find on display comes in an mSATA format. Known as the M6M, the mSATA drive come in capacities starting at 64GB and rising up to 512GB whilst offering read and write speeds that are as strong as the full fat M6Pro. To show that the M6M is just as strong as the Pro, Plextor have taken two drives and put them together in a dual-mSATA to SATA adaptor and set them up in RAID0 – ideal for blistering gaming performance in a compact system where an M6e is not an option.