More AMD Polaris 10 Details Revealed
Samuel Wan / 5 years ago
In the few days after AMD first demoed Polaris 10 to us at Capsaicin, more details about the upcoming graphics cards have been revealed. Set to be the big brother to the smaller Polaris 11, the better performing chip will drop sometime after June this year.
First off, we’re now able to bring you more information about the settings Hitman was running at during the demo. At Ultra Settings and 1440p, Polaris 10 was able to keep to a constant 60FPS, with VSync being possible. This means the minimum FPS did not drop below 60 at any point. This puts the card at least above the R9 390X and on par if no better than the Fury and Fury X. Of course, the demo was done with DX12 but the boost is only about 10% in Hitman.
Another detail we have uncovered is the maximum length of the engineering sample. Based on the Cooler Master Elite 110 case used, the maximum card length is 210mm or 8.3 inches. In comparison, the Nano is 6 inches and the Fury X 7.64 inches. Given the small size, one can expect Polaris 10 to be as power efficient as Polaris 11 and potentially be using HBM. Given that Vega will be the cards to debut HBM2, Polaris 10 may be limited to 4GB of VRAM. Finally, display connectivity is provided by 3x DP 1.3, 1x HDMI 2.0 and 1 DVI-D Dual Link though OEMs may change this come launch unless AMD locks it down.