Cases

Antec P10 FLUX Mid-Tower Case Review

Interior

If we remove the side panel, you’ll see that there’s a nice thick layer of noise dampening material on the inside.

There’s a lot of space on the interior of the case too, and Antec even say’s on their own website that it’ll support some of the largest air coolers on the market, as well as some of the massive new GPUs such as the ASUS STRIX 3080.

There’s a good range of cut-outs around the motherboard, allowing for quick and easy cable routing. There are no fancy grommets here, but with no windows on the case, they’re hardly needed.

There’s a full-length PSU cut-out, allowing you to hide all the cable gore. However, it features a fan mount to better direct the airflow through the case, as well as plenty of ventilation holes. There’s even a reverse fan, which we’ll see more of shortly, as it’s not pre-installed.

There’s a lot of space up front for mounting additional cooling hardware. Plus, there’s a cut-out in the shroud, allowing for a full-height radiator to be installed.

While the case will support a 5.25″ optical drive, or similar sized accessory, you can remove this bracket completely if you feel the need.

Finally, we have the rear fan, giving us five fans in total! Clearly, airflow isn’t going to be an issue here.

Now if we remove the right-side panel, you’ll find even more noise isolation materials on there too. Combined with those on the left side, the front panel and even in the top of the case, the P10 Flux is very well padded! Of course, you’ll also find another dust filter here for that side panel intake.

There’s a good amount of cable routing space here, but keep in mind that you have the PSU shroud to cram excess cables under. Plus, there’s no side panel, so aesthetics aren’t quite as important on the interior so you can be a little lazy with it.

There are two SSD mounts right behind the motherboard.

Plus an additional HDD tray in the bottom of the case.

All the fans in the case are connected to this fan speed control hub. There are five fans in the case, but the case and hub will support a sixth.

Page: 1 2 3 4 5

Peter Donnell

As a child still in my 30's (but not for long), I spend my day combining my love of music and movies with a life-long passion for gaming, from arcade classics and retro consoles to the latest high-end PC and console games. So it's no wonder I write about tech and test the latest hardware while I enjoy my hobbies!

Disqus Comments Loading...

Recent Posts

HONOR Pad 9, 12.1-inch Wi-Fi Tablet

The device supports 35W charging( charger needs to be purchased separately) 【12.1-inch Eye-Protective Screen】HONOR Pad…

23 hours ago

HP OMEN 34c Curved Monitor, 34′ WQHD VA 165hz, Gaming Console Compatible

ULTRA-ESCAPISM - You can’t escape… the FUN that comes with this ultrawide, 1500R curved display.…

23 hours ago

MSI MEG 342C QD-OLED 34 Inch UWQHD Curved Gaming Monitor

1800R QD-OLED Panel: With stunning image quality and fast response time. Ultrawide screen: 3440 x…

23 hours ago

ASUS TUF Gaming GT502 ATX Mid Tower Gaming Case

Panoramic view: tempered glass panels on the front and sides provide a subtle tinted view…

23 hours ago

Cooler Master MM720 RGB-LED Claw Grip Wired Gaming Mouse

THE MASTER CLAW - The Cooler Master MM720 combines the award-winning design features of both…

23 hours ago

PlayStation 5 Console

The PS5 console unleashes new gaming possibilities that you never anticipated. With PS5, players get…

23 hours ago