With the side panel removed, you can see there’s a nice thick layer of sound dampening material on the panel. This will soak up vibrations, fan noises, etc. There’s another layer just like it on the right-side panel too.
The case’s interior is nice and spacious, with room for mounting an ATX motherboard and three vertical cable routing holes to handle that. However, there are a couple of extra cable routing holes for those fitting an E-ATX motherboard, as the motherboard will obstruct the first set.
There’s a 5.25″ drive bay up in the top, should you need it. A little old-school, but while I don’t use one, I’m sure plenty of people still require one. It is removable, though, and you can take it out to expand the number of fans you can mount in the front panel. It’ll need taking out for E-ATX motherboards too, which is a shame.
There are two Antec 120mm fans pre-installed in the front, as well as a dust filtering system.
There’s a full-length PSU shroud in the case, which will help with cable management. However, there’s also a large cut-out at the front, should you wish to get a radiator in the front panel.
There’s also a 120mm fan in the rear too.
Behind the motherboard, you’ll find a decent amount of cable routing space. However, with the PSU shroud, there’s a lot more space in the lower section for cramming excess cables out of the way.
There are plenty of cable routing holes, plus, loads of very useful cable tie loops that’ll help you keep things organised.
I like that Antec has rounded all edges and corners too, so your cables won’t get snagged up anywhere.
There are two SSD mounts located right behind the motherboard. The mounts are pretty basic, but they are removable and will more than get the job done.
There are two more drive mounts in the bottom too, with two tool-free trays for 3.5″ drives, but you can screw in 2.5″ drives if you so desire.
Finally, a good amount of space for the PSU mount. There are two foam strips to help prevent unwanted vibrations too.
Finally, the front panel pulls away, revealing those two lovely front fans. However, you can also excess two of the 5.25″ drive bay screws here, allowing you to remove the bracket entirely (which I am doing).
CORSAIR RMe Series Fully Modular Low-Noise Power Supplies provide quiet, reliable power with 80 PLUS…
Unleash the power of the Samsung 980 PRO with Heatsink for next-level computing and gaming.…
With Manor Lords being one of the most wish-listed games on Steam you wouldn't think…
The CORSAIR 2000D AIRFLOW is a Mini-ITX small-form-factor case with phenomenal cooling thanks to steel…
Active Noise Cancelling: Experience the advanced technology of TUINYO Wireless Headphones, featuring active noise cancellation…
Every musician knows that his or her most important tools for any performance are ……