Arctic cooling release the Accelero Mono PLUS VGA cooler

Arctic Cooling constantly try to complete the line up of their VGA cooler series, which has resulted in the launch of its first 120 mm single fan VGA cooler – the Accelero Mono PLUS. It is equipped with an universal mounting mechanism design that offers full support to a wide range of VGA graphic boards. The Accelero Mono PLUS utilizes a single 120 mm PWM fan with five heatpipes that reaches a maximum cooling capacity of 200 Watts.

The Accelero Mono PLUS is not only emphasis on the cooling performance. It also cools the VGA cards quietly with a low noise impeller design and a patented fan holder. Furthermore, the PWM controller in the Accelero Mono PLUS allows you to operate the fan at a speed specified by the GPU temperature.

In order to achieve the best results from this cooler, we applied an electrically non-conductive thermal glue G-1 to affixing the VR and RAM heatsinks that offer enhanced components cooling. Compare to the traditional thermal tapes and pads, the G-1 provides a far better thermal conductivity and can be removed without leaving any residues behind.

Specifications

• Max. Cooling Capacity 200 Watts
• Heatpipe Ø 6 mm x 5
• Heatsink Material Aluminum fins x 43, thickness 0.4 mm
• Fan 120 mm, 400 – 1,500 RPM (controlled by PWM)
• Bearing Fluid Dynamic Bearing
• Noise Level 0.4 Sone
• Current, Voltage 0.08A – 0.13A, 4.2V – 12.0V
• Dimensions 136 (L) x 138 (W) x 51 (H) mm
• Weight 348 g

The Accelero Mono PLUS comes with a six-year limited warranty with a MSRP at 59.95 USD/43.98 EUR, excluding VAT.

Source: Press Release