ASUSTOR Announces Stylish and Budget Friendly 10 Series
Bohs Hansen / 3 years ago
ASUSTOR has launched a new line of entry-level NAS devices called the 10-series and it is the first ARM powered series from ASUSTOR. The new NAS units AS1002T and AS1004T are powered by a Marvell ARMADA-385 1.0GHz dual-core processor and come with 512MB onboard RAM. That should be plenty of performance for normal file-serving and streaming alike.
Intel’s x86 based CPUs aren’t the cheapest on the block and opting for an ARM based solution can cut the costs quite a bit. The ARMADA-385 shouldn’t be discarded due to that as it comes with hardware encryption engine and floating-point unit while it only consumes a small amount of power; a truly efficient little NAS.
The AS1002T is a 2-bay NAS and the AS1004T is a 4-bay NAS, but other than that they are the same. You get two USB 3.0 ports where one of them is placed on the front as well as a single Gigabit Ethernet connection. Plenty to hook everything up and get a good performance. The NAS units are capable of providing read and write performance of 95 MB/s and 110 MB/s.
The diamond plate finish gives the units a nice touch and the installation is completely tool-less thanks to the hand-screw design. There is one more minor difference in the two units: The AS1004T comes with a 120mm fan where the AS1002T only has a 70mm fan.
“ASUSTOR’s 10 series was designed with both hardware performance and modern aesthetics in mind,” said Johnny Chen, Product Manager at ASUSTOR. “The devices also feature the convenient use of hand screws, which allows users to easily remove the outer cover and complete hard disk installation without the use of any extra tools.”
Both NAS units feature ASUSTOR’s ADM (ASUSTOR Data Master) 2.5 firmware that provides users with the latest enhanced core functions such as internal backup, shared folder based network recycle bins, and iSCSI LUN snapshots. Optionally, users can download more apps such as Syslog Server and DataSync for Microsoft OneDrive along with newly upgraded versions of existing Apps such as Photo Gallery and LooksGood. The NAS units will of course also work with ASUSTOR’s mobile apps for tasks such as system management, file management, backup, downloading, media sharing, home surveillance and more, allowing users to have effortless and continuous access to their NAS while on the go.
Key Features for the AS1002T and AS1004T
- Marvell 1.0 GHz Dual-Core Processor
- Pre-installed 512 MB Memory
- 1 x Gigabit Ethernet Port
- Front of Device: 1 x SuperSpeed USB 3.0 (5 GB/s) Port, LED Indicators
- Back of Device: 1 x SuperSpeed USB 3.0 (5 GB/s) Port, Power Button, Reset Button
- Hand Screws, Easily Remove Cover and Install Hard Disks Without Additional Tools
- Supports Hardware Encryption Engine
- Supports RAID Volume Management RAID 0/1, Single, JBOD (AS1002T)
- Supports RAID Volume Management RAID 0/1 /5 /6 /10, Single, JBOD (AS1004T)
- Maximum Supported Capacity of Hard Disks: 12TB (AS1002T)/ 24TB (AS1004T).
- Supports Seamless System Migration