Storage

Buffalo TeraStation TS6400DN 16TB SMB NAS Review

Test Methodology

Most of the test system hardware for NAS testing isn’t an important factor when it comes to benchmarks, most of it comes down to the network infrastructure and drives. I am using 10 GBASE equipment which means that I should max out any Gigabit Ethernet connections with ease and I got a second port to aggregate with, in case one isn’t enough. The benchmarks will normally be performed with Seagate IronWolf 10TB NAS drives, but this time I’m using the included drives. The network connection goes through a 10GBASE managed switch which should give us some great benchmark results.

Test system:

Drives and Volumes

The NAS is filled with HDDs and all available drive modes will be tested. Which are available will depend on the tested model. However, all available modes will be tried and benchmarked. That includes RAID 0/1/5/6/10, JBOD, and single drive setups, but also SHR1 and SHR2 where available. I will also test different file systems such as EXT4, ZFS, and Btrfs as well as folder and volume encryption whenever they’re available.

We use the best benchmark result from each test, and each benchmark is run five times five times. In the event of large differences, multiple charts will be created to show the different performance results.

Network Setup

The NAS connects through a D-Link DXS-1210-12TC managed 10GBase switch which connects to the rest of our network. All client systems use 10GbE adapters of varying origin, but the main NAS and network test system has a D-Link DXE-820T dual 10GbE network interface card.

Software

With a device of this sort having so many different applications, Intel’s NASPT software covers all the bases and also gives us a set of results that we will be able to utilise and compare those against other similar systems.

Intel NASPT (Network Attached Storage Performance Toolkit) performs its test by transferring varying sizes and quantities of data to and from the device based on twelve different scenarios.

Intel’s NASPT software does require us to drop the memory down to 2GB, as using any more would lead to data caching and skew the results. But it’s a great and free app, allowing you to run your own comparisons.

Page: 1 2 3 4 5 6 7 8 9 10

Bohs Hansen

Disqus Comments Loading...

Recent Posts

KOORUI 27 Inch FHD Gaming Monitor

EXCEPTIONAL PICTURE QUALITY: The 27 inch FHD (1920*1080) display with the DCI-P3 90% wide color…

5 hours ago

Samsung LS24A336NHUXXU 24″ Full HD 1920×1080 Monitor

A wider view, clear all round. Experience the whole picture from wherever you sit. Everything…

6 hours ago

Dell SE2722HX 27 inch Full HD (1920 x 1080) Monitor

Minimize harmful blue light emissions to help reduce eye fatigue with Dell’s TÜV -certified ComfortView…

6 hours ago

Cooler Master Announces MasterBox 600 PC Case

Cooler Master has decades of experience in the case market, and I'm sure many of…

8 hours ago

Cooler Master Tempest GZ2711 OLED 240Hz Gaming Monitor Review

Cooler Master makes so many of my favourite monitors, and I use and own a…

8 hours ago

Intel Arc GPU Drivers 101.5445 WHQL Game On Optimised for Manor Lords

Intel has just released the latest version of their Arc GPU Graphics Drivers. While the…

8 hours ago