When testing in a power supply laboratory it is difficult to take fan noise readings as the noise from the Sunmoon test equipment and air conditioning corrupts everything. The next best thing in our circumstances was reading off the fan speed with a tachometer to get an idea for the noise. The ambient temperature during testing held constant at 22 degrees, with 1 degree of variation. Each power supply had a consistent time period of 5 minutes to stabilise between each load scenario.
In my experience the following general relationships apply between noise levels and fan speeds, though it can vary greatly between the type of fan used.
The default hybrid fan mode means the power supply fan doesn’t kick in until around 50% load. After the fan kicks in the fan curve is quite steep which seems like a shame because given the efficiency it doesn’t need to get as loud as it does at 100% load.
Welcome to the new era of performance. AMD Ryzen 7000 Series ushers in the speed…
Take a step into the future with the Z790 Gaming Plus Wifi motherboard, designed and…
The 990 EVO offers enhanced sequential read/write speeds up to 5,000/4,200 MB/s, and random read/write…
High-Performance Air Cooler with six 6mm heat pipes and a copper cold plate for high-efficiency…
Experience an outstanding performance and exceptional toughness with the ASUS TUF K1 RGB Gaming Keyboard.…
Every time you turn on your computer, you’re using your storage drive. It holds all…