Corsair Carbide Series 200R Mid-Tower Comptact ATX Chassis Review

Starting on the left side, the chassis comes fitted with two quick release thumb screws, support for a pair of 120 or 140mm fans in a vertical configuration and you’ll also find some ventilation on the right which supplies the front intake fans.

The top of the chassis has extra ventilation, which also has support for a further two 120 or 140mm fans.

The right side of the chassis features another panel with quick release thumb screws and further ventilation on the side of the front panel to allow air to the front intake fans.

There are plenty of features on the underside of the chassis, with four good quality rubber feet that will help reduce vibration but also provide ground clearance for the 120 / 140mm fan mount in the center and the PSU air intake, which is nicely fitted with a removable air filter.

The front panel of the chassis features a pair of USB 3.0 ports, headset and microphone sockets as well as the usual power and reset buttons. Below that we have room for 3 x 5.25″ drives, The side air intakes allow Corsair to keep the rest of the front panel looking clean and smart.

Around the back of the chassis we have a pre-installed 120mm exhaust fan, 7 re-usable and ventilated expansion slot covers, further ventilation holes to the right of the expansion slots and a bottom mounted PSU cut-out.