Corsair H60 120mm AIO Liquid CPU Cooler Review




/ 6 years ago

« Previous Page

Next Page »

Test System and Methodology


Please note that our testing system was completely revised in September 2017. That means all previous results have been scrapped, and a new set of benchmarks introduced. For a look at our previous reviews, please consult our most recent review that used that system. Please note that we re-tested the Noctua NH-D15S as our base benchmark for cooling results.

Test system:

  • Gigabyte Aorus Gaming 9 Z270
  • Intel Core i7-7700K Delidded w/ NT-H1 under IHS
  • Radeon R7 Passive GPU with 2GB VRAM
  • Gigabyte GTX 980 Ti
  • 32GB Crucial DDR4 2400 MHz
  • 512GB OCZ SSD
  • be quiet! Dark Power Pro 800W
  • Lian Li T80 Test Bench
  • All testing conducted using NT-H1 thermal paste

We’d like to say a big thank you to Gigabyte, Noctua, Crucial, Intel, OCZ, be quiet!, and Lian Li for providing us with the above testing equipment and their on-going support.

Testing Methodology

  • We always use Noctua Noctua NT-H1 thermal paste to make sure testing reveals the efficiency of the tested coolers not the efficiency of the bundled thermal paste
  • Prime 95 is run for 10 minutes to calculate “load” results
  • Unigine Superposition is run for 10 minutes to calculate “gaming” results
  • The average temperature across all cores is taken
  • Fans are left to operate at default PWM profile speeds unless otherwise stated
  • For water cooling tests, all pumps have been operated at 12 volts unless otherwise stated
  • Ambient temperatures should be between 21-23 degrees in all our tests unless otherwise stated
  • Acoustic measurements are taken 10cm horizontally and 10cm vertically away from the CPU cooler with the VGA fan disabled
  • Stock tests are performed using “out of the box” settings for the CPU
  • Overclocking tests are performed with the CPU set to 5 GHz and 1.345v
  • All coolers were tested under identical settings unless otherwise stated.
  • There is approximately a 1-degree Celsius margin of error in our temperature recording software CPUID HW Monitor
  • There is approximately a 1.5dBA margin of error with our Benetech GM1351 decibel meter
  • In all these graphs we may have a few “reference” results of particular products that do not fit within that category for comparative purposes.

Software Used

« Previous Page

Next Page »


Topics: , , , , , ,

Support eTeknix.com

By supporting eTeknix, you help us grow and continue to bring you the latest newsreviews, and competitions. Follow us on FacebookTwitter and Instagram to keep up with the latest technology news, reviews and more. Share your favourite articles, chat with the team and more. Also check out eTeknix YouTube, where you'll find our latest video reviews, event coverage and features in 4K!

Looking for more exciting features on the latest technology? Check out our What We Know So Far section or our Fun Reads for some interesting original features.

eTeknix Facebook eTeknix Twitter eTeknix Instagram eTeknix Instagram
  • Be Social With eTeknix

    Facebook Twitter YouTube Instagram Reddit RSS Discord Patreon TikTok Twitch
  • Features


Send this to a friend
})