Featured

Corsair HX750i Fully Modular Platinum Power Supply Review

Fan Speed

When testing in a power supply laboratory it is difficult to take fan noise readings as the noise from the Sunmoon test equipment and air conditioning corrupts everything. The next best thing in our circumstances was reading off the fan speed with a tachometer to get an idea for the noise. The ambient temperature during testing held constant at 22 degrees, with 1 degree of variation. Each power supply had a consistent time period of 5 minutes to stabilise between each load scenario.

In my experience the following general relationships apply between noise levels and fan speeds, though it can vary greatly between the type of fan used.

Below 800 RPM – Inaudible/Silent
800 to 1000 RPM – Barely audible
1000 – 1200 RPM – Audible but still quiet
1200 – 1400 RPM – Moderately noisy
1400 – 1800 RPM – Noisy
1800 RPM or higher – Intolerable

The fan didn’t run at all until we got up to 60% load, meaning the PSU remained completely silent and should do for most day-to-day operation. Even when we got it to 100% load, the fan was still little more than a whisper and you’ll likely never hear it once it’s installed in a chassis.

Page: 1 2 3 4 5 6 7 8

Peter Donnell

As a child still in my 30's (but not for long), I spend my day combining my love of music and movies with a life-long passion for gaming, from arcade classics and retro consoles to the latest high-end PC and console games. So it's no wonder I write about tech and test the latest hardware while I enjoy my hobbies!