Noise and Ripple can easily be measured by an oscilloscope. These show how much voltage fluctuation there is on a particular rail. We tested the rail stability of the 3.3 volt, 5 volt and 12 volt rails using an identical time and millivolt scale for all graphs. millivolt ripple is measured by the peak to peak size of the voltage curve.
The latest ATX 12 volt version 2.3 specifications state that ripple from peak to peak must be no higher than 50 millivolts for the 3.3 volt and 5 volt rails, while the 12 volt rail is allowed up to 120 millivolts peak to peak to stay within specifications. Millivolt figures are stated to the closest increment of 5 given their variability.
Load (%) | 3.3V Ripple | 5V Ripple | 12V Ripple |
20 | 7 | 8.2 | 21.6 |
40 | 7.2 | 8.4 | 27.6 |
60 | 7.4 | 8.6 | 35.8 |
80 | 8.2 | 9.8 | 46.6 |
100 | 9.4 | 10.6 | 59.6 |
Ripple suppression is where this unit performs well, on the 3.3 and 5 volt rails exceptional ripple suppression can be seen which is testament to the quality of the secondary side construction. The 12 volt rail is also strong but nearing 60 mV isn’t the best we’ve seen; it is a strong result but premium units will tend to have sub 35 mV.
3.3 volt @ 100%
5 volt @ 100%
12 volt @ 100%
Kingston’s NV2 PCIe 4.0 NVMe SSD is a substantial next-gen storage solution powered by a…
Following the well-established legacy of the Seasonic FOCUS Series, the FOCUS GX Series was upgraded…
As a new addition to The Tower series, The Tower 200 has the same contours…
Upgrade your gaming setup with the Pure Base 500DX case from be quiet! This impressive…
Fractal fuse flair with function in the new Pop series of cases that does not…
In the latest patch that has come to League of Legends, the developers have added…