EK Water Blocks (EKWB), a leading computer cooling solutions provider, is proud to finally unveil its Special Edition high-performance GPU water blocks for the NVIDIA GeForce® RTX 3080 Founders Edition graphics card.
The EK-Quantum Vector FE RTX 3080 D-RGB comes in two versions – Silver and Black, both featuring stark contrasts between the aluminum outer shell and backplate, as well as the Plexi window and terminal illuminated with addressable D-RGB LEDs. – Both water blocks come with two types of connection terminals, offering unrivaled versatility. The performance is one of the key elements of the design, which is why this block features a 30% larger fin area compared to other water blocks from the Vector family.
The EK-Quantum Vector FE RTX 3080 D-RGB water block enclosure is the most complex GPU cooling solution developed by EK to date. The small form factor and unique shape of the RTX 3080 Founders Edition PCB presented a rare engineering challenge.
The water block is purpose-designed with an extremely thick copper base for high-performance, allowing it to clear all components of the densely-packed PCB and adding more heat removal capacity in the process. The cooling engine used in this water block is the largest EK has built to date, having roughly 30% more surface area than the rest of the existing Vector series water blocks.
Like the Magnitude CPU water block, the entirety of this water block is CNC-machined without mass-production techniques. The block’s base is milled out of a 12mm thick piece of pure electrolytic copper sourced from Europe, which is then nickel-plated, while its top is CNC-machined out of a glass-like cast Acrylic material.
The external enclosure, which is not in any contact with the coolant, is machined out of a 20mm thick solid piece of aluminum, which is afterward anodized into black or gray color, depending on the model. The included single-slot I/O shield is supplied with special screws for attaching it to the aluminum enclosure in order to even out the entire water block’s weight distribution. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.
The water block is delivered with a set of connection terminals, allowing users to swap them out based on their needs. One terminal has two direct G1/4″ ports on the side, while the other one is more conventional, having four G1/4″ ports going through it.
The new design allows terminals to be directly attached to the copper cold plate of the GPU water block, making it more rigid and reducing the chances of damage. The terminal is neatly located between two prongs on the PCB, utilizing minimal space. This kind of design allows for incredible versatility, especially for Small Form Factor builds, and of course, more interesting aesthetics.
This EKWB Special Edition Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as cooling liquid is channeled right over these critical areas. The water block is in contact with MOSFETs and chokes to maximize cooling and minimize the chances of unwanted coil whine. The flow paths are also optimized to reduce hydrodynamic instabilities and vortexing (dead spots) inside of them.
The integrated Open Split-Flow cooling engine design proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings and still achieve top performance.
The jet plate and fin structure geometry are optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. Fin array is populated by 31 microfins with 0.6mm wide microchannels that provide exceptional cooling performance without unnecessary flow restrictions or clogging hazards.
The EK-Quantum Vector FE RTX 3080 D-RGB full-cover water blocks are made and assembled in Slovenia, Europe, and are available for pre-order through the EK Webshop and dedicated reseller network. The first batch of water blocks is expected to ship out in early December, with the later orders filling out in the following weeks.
For more information, you can visit the official EKWB website via the link here!
What do you think? – Let us know in the comments!
ColourPrimary ColourBlackMain radiator colour (cage)BlackMain radiator colour (fins)BlackDimensionsLength393 mmWidth120 mmHeight25.5 mmRadiator size360 mmRadiator SpecificationsFin density…
Compatible with the latest Intel and AMD CPUs Large 240mm radiator to dissipate heat Two…
Not a week goes by without a new game getting some form of DLSS or…
110% mechanical keyboard with 109 keys in a UK ISO layout V-silk PBT keycaps with…
Last week, Europe saw a spectacular rise in video game sales, particularly for Fallout 4,…
TEAMGROUP has unveiled the MP44Q M.2 PCIe 4.0 SSD, a cutting-edge addition to their lineup…