Featured

Gamemax Polaris RGB Tempered Glass Chassis Review

Complete System


Building a system inside this chassis was relatively straightforward. I did hit a snag trying to fit a 240mm radiator though. It’s possible, but I decided part way through that it was more trouble than it was worth. Doing so would require removing all of the front fans, then some small interior screws to remove the front panel glass, then put it all back. Given I want to use those stock RGB fans, I switched to an air cooler. Not the end of the world, but something to keep in mind.

The chassis is fairly narrow, but since there’s very little room behind the motherboard, we’re left with plenty of width for the expansion cards. Some modern GPUs are pretty wide, so it’s not so bad having space here. Of course, there’s more than enough room for a couple of graphics cards too.

Our Noctua cooler fit with ease, although I used a smaller model as the D15S would be touching the glass. It still looks great though, and with four pre-installed fans, and the radiator issue I had, it’s clear this chassis is best suited to air-cooled systems; which I personally prefer.

The clearance for the graphics card is superb, and with no HDD bays up front, you can use the full length of the chassis for any of the longest GPUs on the market.

Tempered Glass

With the window back in place, things look super neat and tidy. The use of an all black interior means that cables and other clunky bits of hardware all but vanish in the darkness. Cable routing space was limited, but with the PSU shroud and a few cable ties, it’s far from tricky to get a clean looking build.

It does look great even with the lights off, and very presentable overall.

RGB!

With the system powered on, the fans certainly come to life with lots of funky colours and effects. By default, they strobe and cycle through colours. You can change the rate of colour change, or even fix a single colour, or even turn them off entirely. Of course, what mode you prefer is up to you. For now, enjoy a quick selection of images showing the lighting in action!

Page: 1 2 3 4 5

Peter Donnell

As a child still in my 30's (but not for long), I spend my day combining my love of music and movies with a life-long passion for gaming, from arcade classics and retro consoles to the latest high-end PC and console games. So it's no wonder I write about tech and test the latest hardware while I enjoy my hobbies!

Disqus Comments Loading...

Recent Posts

noblechairs Memory Foam Pillow Set – The Elder Scrolls Online Edition

Memory foam pillow set featuring designs from The Elders Scrolls Online Plush cover material which…

2 days ago

Assassins Creed Red Release Date Leaked

For the past year and a half, the next Assassin's Creed has been shrouded in…

2 days ago

Samsung 27″ 2560×1440 VA 165Hz FreeSync 1ms Curved Odyssey Gaming Monitor

Your gaming world, more lifelike than ever before. Packing in 1.7 times the pixel density…

2 days ago

Kolink Observatory Midi Tower RGB Gaming Case

Case designed to support motherboards up to E-ATX Front and side panel in 4 mm…

2 days ago

Montech AIR 100 ARGB Black Tempered Glass micro-ATX Case

The AIR 100 series is the first Micro-ATX case from Montech's acclaimed AIR Series PC…

2 days ago

ThermalTake CTE T500 Air Tempered Glass Full Tower Case Black

The CTE T500 Air is a specially designed E-ATX full tower chassis from the new…

2 days ago