GeIL ORION 16GB 3200MHz DDR4 Memory Review

How We Test

Here at eTeknix, we endeavour to disclose vital information regarding the benchmarking process so that readers can quantify the results and attempt to replicate them using their hardware. When it comes to our benchmarks in our reviews, the benchmarks are pretty self-explanatory although there are a few exceptions. Remember that your choice of graphics card, CPU, the silicon lottery, and other factors can yield different numbers, and there’s always a margin for error when using any software. Therefore, your experience may vary.

Testing Your Own System

Links are provided below, as well as the settings we use. We encourage you to not just look at how one product compares to any other, but how it compares to your own. If you’re looking to build a new system, you should benchmark your current PC using our benchmarks and settings where possible. You should then look at the percentage improvement from your current hardware to the hardware we tested to give you a ballpark figure of how much an upgrade this will provide you with.

Test System

• Motherboard – Gigabyte Aorus Pro Z390
• Processor – Intel Core i9-9900K @ Stock
• CPU Cooler – Noctua NH-D15S
• Power Supply – Be Quiet Power Zone 1000W
• Main Storage Drive – Toshiba OCZ VX500 500GB
• Operating System – Windows 10 64-bit

Software Used

• CineBench R15 (download)
• AIDA 64 Engineer (download)
• WPrime (download)
• 3DMark Fire Strike Physics (download)
• PCMark 10 Productivity (download)
• HWMonitor (download)
• CPU-Z (download)

Methodology

In our RAM reviews, we keep things relatively simple. We put the RAM kit that is being tested into our test system and benchmark it at its first XMP profile using a variety of benchmarks and tests. Once complete, we apply a reasonable overclock where possible and benchmark the same software with the overclocked values. The CPU clock speed is set to default for both runs.