Graphics Cards

INNO3D RTX 4070 Super Twin X2 Graphics Card Review

A Closer Look

It’s a gorgeous looking graphics card, with a metallic two-tone finish on the top and a set of screws giving it a slick industrial aesthetic. It’s a design we’ve seen on plenty of INNO3D cards too, but that doesn’t lessen the appeal one bit.

There are two large fans, each featuring an 11-fin design that should allow them to move a fair bit of airflow even at lower RPM. The fans are capable of running up to 2100 RPM too, so should give some seriously cooling performance when needed.

Also quite impressive is the overall size of the card, which is nicely slim, not exceeding a two-slot design, so it’ll be more compatible with smaller and slimmer builds unlike the more high-end cards in the Nvidia range.

Tucked into the side of the card, you’ll find the now fairly common 12VHPWR power connector, meaning you only need the one power cable.

The backplate is robust, but is also partially open, allowing one of the fans to blow air through the card, further enhancing the overall cooling performance.

Towards the back of the card, you’ll find four display connectors comprising of three DisplayPort and one HDMI connector, which is the same configuration seen on the Nvidia founders Edition.

Tearing down the cooler, we get a good look at the PCB, which features six 2GB VRAM chips, giving the card its 12GB total.

The VRM configuration does look like it has had a few upgrades too, with two more capacitors on the back row, and one more on the chipset side compared to the Founders Edition, and more robust chokes too, allowing this card to push a slightly higher overclock, which we’re told should be about 50MHz over stock easily enough.

The backplate has three thermal pads, allowing additional cooling for the VRM and VRAM chipsets.

Plus, there are quite a significant number of thermal pads on the heatsinks, covering the capacitors, chokes, VRM, VRAM, and surrounding components, ensuring everything is directly cooled, rather than relying on just air cooling for some of it.

Page: 1 2 3 4 5 6

Peter Donnell

As a child still in my 30's (but not for long), I spend my day combining my love of music and movies with a life-long passion for gaming, from arcade classics and retro consoles to the latest high-end PC and console games. So it's no wonder I write about tech and test the latest hardware while I enjoy my hobbies!

Disqus Comments Loading...

Recent Posts

Glorious Model D- USB RGB Optical Gaming Mouse – Matte Black

Precise and ergonomic gaming mouse with a distinct honeycomb surface Highly-accurate optical sensor with 12,000…

2 hours ago

noblechairs Memory Foam Pillow Set – The Elder Scrolls Online Edition

Memory foam pillow set featuring designs from The Elders Scrolls Online Plush cover material which…

2 hours ago

Assassins Creed Red Release Date Leaked

For the past year and a half, the next Assassin's Creed has been shrouded in…

2 hours ago

Samsung 27″ 2560×1440 VA 165Hz FreeSync 1ms Curved Odyssey Gaming Monitor

Your gaming world, more lifelike than ever before. Packing in 1.7 times the pixel density…

2 hours ago

Kolink Observatory Midi Tower RGB Gaming Case

Case designed to support motherboards up to E-ATX Front and side panel in 4 mm…

2 hours ago

Montech AIR 100 ARGB Black Tempered Glass micro-ATX Case

The AIR 100 series is the first Micro-ATX case from Montech's acclaimed AIR Series PC…

4 hours ago