Maxon Cinebench R23 Benchmark Released




/ 4 months ago
Maxon Cinebench R23 Benchmark Released

If you’ve seen some of our reviews, you’ll know that Cinebench is something we run in all of our CPU and motherboard reviews, system reviews and more. It’s a fantastic tool for showing system performance, especially for those who plan to do any kind of rendering. We’re still rocking Cinebench R15 and R20, but Maxon just released Cinebench R23!

The new update also adds support for the ARM-based M1 processor used in MacBooks, as well as the latest hardware from Intel and AMD, of course. However, while Cinebench was once a faster benchmark, this one has a minimum of 10 minutes to load the temperatures and give us a real-world test of what really happens when you’re rendering. Check out the feature list below, but be warned, it’s pretty extensive.

5U7T8SgnVZP6g4AF

Technical Information

  • Cinebench R23 now supports Apple’s M1-powered computing systems
  • Cinebench is now based on the latest Release 23 code using updated compilers, and has a minimum runtime activated by default (previously hidden in preferences)
  • Cinebench R23 provides improved benchmark accuracy for current and next generation CPUs to test if a machine runs stable on a high CPU load, if the cooling solution of a desktop or notebook is sufficient for longer running tasks to deliver the full potential of the CPU, and if a machine is able to handle demanding real-life 3D tasks.
  • Users now have the option to directly test the single core performance without manually enabling the “Advanced benchmark” option. The “Advanced benchmark” allows users to set arbitrary minimum runtimes to stress test the hardware for even longer periods of time.
  • Because of the code and compiler changes, Cinebench score values are readjusted to a new range so they should not be compared to scores from previous versions of Cinebench.
  • Cinebench R23 does not test GPU performance.
  • Cinebench R23 will not launch on unsupported processors. On systems lacking sufficient RAM to load the test scene, a warning will be displayed and the CPU benchmark will not be executed.
  • Background tasks can significantly influence measurement and create diverse results. It’s always a good idea to shut down all running programs and disable any virus checking or disk indexing but it’s impossible to eliminate all background processes. Modern operating systems perform various background tasks that cannot or should not be disabled, even though they could have a minor influence on the results.
  • Test results can vary slightly because it’s impossible to disable every background task of the operating system. These tasks are one factor that may have a slight influence on measurements. Also, modern computers and graphics cards dynamically adjust clock speeds based on environmental conditions like power and temperature. For instance, processors will reduce clock speed when running too hot to allow for cooling and prevent damage. With many modern processors, the reverse is also true. They are able to overclock themselves when the temperature is low enough. Therefore, a system freshly started in a relatively cool environment will typically run faster than the same system that has been performing benchmarks for several hours in a heated office.
  • It is also possible to launch Maxon Cinebench with command line options. Please refer to your operating system manual on how to start an application using the command line. After the name of the application enter one of the options listed below. Maxon Cinebench will then be executed, run the specified test, then quit and display the result in the command line console. The result is not saved as a file.
  • The following command line options are available:
    • g_CinebenchCpu1Test=true – runs only the Single Core test procedure
    • g_CinebenchCpuXTest=true – runs only the Multi Core test procedure
    • g_CinebenchAllTests=true – runs all test procedures sequentially
    • g_CinebenchMinimumTestDuration=100 – sets a minimum test duration of 100 seconds
  • To get a proper console log on Windows, you have to add an additional command before the Cinebench executable name. Example:
  • start /b /wait “parentconsole” Cinebench.exe g_CinebenchAllTests=true
eDMRw97b4rGeIKfz

Download a free copy of Cinibench R23 from Maxon here.


Topics: , , , ,

Support eTeknix.com

By supporting eTeknix, you help us grow and continue to bring you the latest newsreviews, and competitions. Follow us on FacebookTwitter and Instagram to keep up with the latest technology news, reviews and more. Share your favourite articles, chat with the team and more. Also check out eTeknix YouTube, where you'll find our latest video reviews, event coverage and features in 4K!

Looking for more exciting features on the latest technology? Check out our What We Know So Far section or our Fun Reads for some interesting original features.

eTeknix Facebook eTeknix Twitter eTeknix Instagram eTeknix Instagram

Check out our Latest Video


Send this to a friend
})