Internal NVMe drives, those we’re used to, but externals are still rare. They exist, but usually, cost quite a premium. Today I’m taking a closer look at MyDigitalSSD’s M2X portable M.2 NVMe enclosure (product link). With it, you can turn your old NVMe drive into a portable one. Naturally, you can also turn a new one into it, but it’s a great way to utilise the old after an upgrade to something new.
The M2X enclosure utilises the latest USB 3.1 Gen 2 standard, allowing you to take NVMe speeds with you on the go. It can turn any PCIe M.2 M (M key) solid state drive into an ultra-portable pocket drive. The connection standard allows for transfer speeds of up to 10Gbps which exceeds SATA performance. You won’t be able to max out most NVMe drives with it, but every bit helps.
The adapter is compatible with 80mm (2280), 60mm (2260), and 42mm (2242) M.2 M form factors, and it is also OS independent. Thanks to the USB power delivery and low power consumption of NVMe drives, the M2X is fully bus powered. That means there’s no need to carry any extra power supply with you.
Inside, it utilises the JMicron JMS583 USB 3.1 Gen 2 to PCIe Gen3 x2 bridge controller. It supports TRIM command for SSD and complies with both of USB Mass Storage Class Bulk-Only Transport (BOT) and USB Attached SCSI Protocol (UASP). With UASP, more simultaneous commands can be sent which allows for a better performance.
The casing is made from durable lightweight aluminium. The choice of material helps with the weight while keeping your drive protected. It also helps with the heat dissipation. When the included thermal pad is used, it allows you to observe an effect of 15 degrees lower temperatures. The material choice and fin design allow this to be possible.
MyDigitalSSD includes both a USB-C and a USB-A cable with the M2X enclosure. So whether your system has a Type-C port or not, you’ll be able to use it. And for anything else, there are plenty of optional adapters on the market.
The MyDigitalSSD M2X enclosure comes in a simple brown box with a sticker. The product itself is pictured and all the features and package contents are listed.
The sticker also functions as seal, going around the side and onto the bottom. But there isn’t more interesting information here.
MyDigitalSSD packed the M2X enclosure adapter with a mini screwdriver and M.2 mounting screw pack for quick and convenient drive installation. There’s both a Type-A and Type-C cable included.
There’s also an assembly diagram included.
AMD has finally lifted the curtain on the highly-anticipated Ryzen 7 9800X3D, putting an end…
In the latest development of GPU technology, AMD is stepping up to challenge NVIDIA’s DLSS…
Push performance to the next level with the blazing speed and massive bandwidth of Crucial®…
ROG Strix OLED XG27AQDMG gaming monitor ― 27-inch (26.5-inch viewable) 1440p glossy WOLED panel, 240…
Its 45-inch 21:9 Ultra-WQHD display gives you a 34% wider view than a standard 16:9…
The Kolink Unity Code X is a high-quality yet affordable showcase that’s ideal for building…