Out of the box the cooler comes with one of the fans pre-installed, although this will have to be removed to aid with installation.
The CPU cooler is designed to hold up to three 140mm fans, although only two are included you can obviously buy an extra one from most major computer retailers.
The fins are really nicely designed, with groves cut in the back to help better channel the airflow.
The 6 heat pipes pass right through the fin stack and you can see they’ve poking through at the top of the cooler.
Here you can see one of the fan connector cables on the underside of the cooler.
the contact plate is screwed in place over the heat pipes and features a large flat surface area with a mirror shine polish.
The underside of the cooler features a pair of cutaways, this will help improve ram compatibility and reduce conflicts with motherboard components, especially welcome if you also have large VRM coolers.
the fan can be mounted on either fin stack in the middle of the cooler, allowing you to direct the airflow in which ever manner best suits your build. There are a few millimetres clearance from the other fin stack.
Here you can see the subtle Noctua logos on the top of each fin stack.
Ceres 300 TG ARGB Snow Mid Tower Chassis is an ATX case that comes with…
ASUS Prime series motherboards are expertly engineered to unleash the full potential of 12th Generation…
Say hello to Raptor-Lake. Intel's incredible 13th generation processors are here to break the boundaries…
This PG34WQ15R2B Phantom Gaming monitor provides exceptional clarity to any gamer thanks to its WQHD…
CORSAIR VENGEANCE DDR5, optimized for Intel® motherboards, delivers the higher frequencies and greater capacities of…
Leap into the future with the ROG Strix B760-F, a fantastic upgrade into 13th Gen…