NZXT Signal HD60 Capture Card Review

Performance

To set up, just plug your computer into the HDMI in, in my case, I’ll be hooking up a Raspberry Pi. Then HDMI out to your display, and the Type-C to the system you’ll be using to record the video. It is compliant with HDMI 2.0, HDCP 1.4/2.2 and DVI 1.0 specifications, and the input and output resolutions are detailed below. Oh and don’t forget you’ll want the latest software downloaded too, however, the device will be detected as input from most major capture software, so you could easily do things your own way too.

Using the NZXT Signal really couldn’t be much easier, just hook up the cables, and open up your capture software. I used OBS, added it as a new input device and it all worked. Well, that’s a lie, I did it all in the wrong order without reading the instructions and the sound didn’t work, but turning it off and back on again soon fixed that. Overall though, it’s stupidly easy to operate. Even Windows Camera app can accept the feed from it, if you just want to record a quick clip that way.

Maximum Input & Pass Through Compatibiltiy

• 3840x2160p 60fps
• 2560x1440p 60fps
• 1920x1080p 60fps
• 1920x1080i 60fps
• 720p
• 480p
• 576p
• 480i
• 576i

Stream & Record Resolutions

• 1920x1080p (60, 50, 30, 25)
• 720p (60, 50, 30, 25)
• 576p (50, 25)
• 480p (60, 30)