Featured

Phantek Enthoo Mini XL Super Micro Tower Chassis Review

Introduction


A few months ago, I reviewed the gorgeous Phanteks Enthoo EVOLV Micro-Tower Chassis and I loved it enough to award it with our Editors Choice Award. This week, we’ve gone a lot further up the Phanteks range, to take a look at their mighty Mini XL Now, the world mini might not imply that this is a big chassis, but it certainly isn’t mini at all, and we’ll show you why that is in just a moment.

Features

Enthoo Mini XL includes 2 x 140mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans.

Appearance

  • Sandblasted aluminum faceplates with matte finish
  • Multi-color LED light strips
  • Stealth interior design

Cooling

  • Extreme cooling capacity
  • Support for up to 14x 120mm / 8x 140mm
  • Comes with 3 Phanteks premium fans
  • PWM fan hub plus 2x y-splitters allow for 8 fan connections* (11 fans max with additional y-splitters sold separately)
  • Extensive water cooling support. Provides up to 5 different installation areas for slim and thick radiators varying from single to triple (120mm and 140mm form factors). Clearance for push-pull fan configurations.

Functionality

  • Dual removable harddrive cages
  • 2x removable Drop-N-Lock SSD brackets
  • Fully equipped with dustfilters (1x top, 1x front, 2x bottom)
  • Removable top panel for easy fan installation and dust filter cleaning
  • Compartment for fan installation in top panel
  • Clean cable management using Phanteks’ preinstalled Hoop-N-Loop cable ties
  • Mod friendly structure uses screws NOT rivets
  • 10 color ambient lighting controller
  • 2x USB 3.0, microphone, 3.5mm audio jack

The Mini XL comes with support for Micro-ATX motherboards, despite being a little bigger than most mid-towers and almost as tall as some full-towers. It also comes with support, through the purchase of some additional brackets which I have at my disposal today, for mini-ITX motherboards. What’s important to mention is that this isn’t an either-or situation, as it’ll support both a Micro-ATX and a Mini-ITX motherboard simultaneously!

“The MINI XL introduces a new form factor, super micro ATX. With its unique power supply location, the Mini XL case has been redesigned with optimal cooling in mind. Resembling the Enthoo Primo, it offers extensive water-cooling possibilities and supports the thickest radiators in the market (80mm). The case brings modularity to a new level. Almost every single panel or bracket can be removed or relocated to serve different purposes. For the ones who desire even more, the Mini XL leaves options for additional upgrades. Pherhaps the most interesting one is the possibility to transform the MINI XL into a dual motherboard system.” – Phanteks

One of the biggest features of this chassis is its water cooling support and the best way to demonstrate this would be the video below. It’s obvious that water cooling enthusiasts are going to love this chassis!

In the box, you get everything you need to get you started, from hard drive and water cooling adaptor brackets, as well as a lovely mini component box for all the screws you’re ever likely to require.

First things first, I’m pretty sure this chassis is coated in some kind of military grade paint used for stealth jets. In a well-lit room with a camera flash for extra light, it still manages to look dark black; that’s not a bad thing, but it’s terrible for some of my photographs. The left side panel features two windows, the larger one on the left, then a smaller one on the right to show off two extra SSD mounts and the Phanteks logo on the inside of the chassis; a great way to show off your fancy SSDs.

The right side panel comes with two ventilated sections with magnetic dust filters on the interior. The one near the front can be used for cooling fans or radiators, or just passive cooling for the hard drive bays dependent on your internal configuration of choice. The section at the rear is for the PSU, which is side mounted in the top right of the chassis.

The front panel looks really cool, with a mixture of curved edges and bold shapes. You can see that the has an extended took to it, with the main section sort of floating from the bottom and right sides of the chassis, which comes with a ten colour LED light strip, further adding to that “floating” effect. This extended design means the chassis is quite wide, but that will help drastically with radiator support, as well as the dual motherboard configurations that are compatible.

Around the back, you’ll see all kinds of crazy things going on. There’s a PSU mount in the top left corner, a universal 120/140mm spacing fan and radiator mount on the right, then down at the bottom you have your Micro-ATX motherboard mounting. Now, it’s worth mentioning that the radiator panel as well as the small panel in the bottom right corner can be unscrewed completely, lifted out of the chassis and replaced with an alternative panel to allow you to install an SFX PSU and Mini-ITX motherboard on top of all the usual hardware; don’t worry, we’ll be doing that shortly.

The top panel is vast, allowing huge amounts of ventilated airflow for a wide range of fan and radiator configurations as you saw in the video at the start of this review.

The front panel is tucked to the right side of the top of the chassis and comes with the usual power controls, two USB 3.0 ports and HD Audio jacks.

Instead of smaller feet, the chassis has two long feet that run the full length of the chassis, giving it extra stability; There are six tough rubber pads to help keep it firmly planted on your surface of choice. There are two dust filters that cover the full length of the chassis, and what’s really nice is that these filters can be removed from the left side of the chassis, making maintenance a much easier task.

Page: 1 2 3 4 5

Peter Donnell

As a child still in my 30's (but not for long), I spend my day combining my love of music and movies with a life-long passion for gaming, from arcade classics and retro consoles to the latest high-end PC and console games. So it's no wonder I write about tech and test the latest hardware while I enjoy my hobbies!

Disqus Comments Loading...

Recent Posts

Twitch Now Banning All Content Focusing On Intimate Body Parts

As by now, I'm sure you are aware Twitch has decided to go ahead and…

7 hours ago

Seconds Patch of “Operation Medic Bag” For Payday 3 Released

I doubt many of you have been keeping up with Payday 3 which is understandable…

9 hours ago

MSI Announces SPATIUM M580 FROZR With A Huge Cooler

Today MSI has announced a new Gen 5 SSD, the SPATIUM M580 FROZR which comes…

9 hours ago

LENRUE PC Speakers, USB/USB-C Powered Computer Speakers with Loud Stereo Sound

Stereo and Noiseless - Without any noise! After multiple debugging, suppress static. Become clearer and…

9 hours ago

HP M27f Ultraslim Monitor 27 Inch

PICTURE-PERFECT IMMERSION – Work or play on a monitor that redefines high definition with its…

9 hours ago

Govee LED Light Bars, Smart WiFi RGBIC TV Backlight

Syncs With Your Music: With an internal high-sensitivity mic, Govee Flow Plus LED light bars…

9 hours ago