Featured

Seagate Enterprise NAS 6TB HDD Four Disk RAID Review

Introduction


We’ve already had the pleasure of a single drive review of Seagate’s Enterprise NAS 6TB HDDs and today it has become time for the RAID review. Thecus provided me with five of these drives, but I’ll only be using four in this review today. Four is a magic number when it comes to RAID and the fifth drive would most likely be set as global spare in most systems anyway, so no point in added it. Four drives also give us a great consistency with other RAID reviews done in the past.

Seagate’s Enterprise NAS drives come in capacities ranging from 1TB and all the way up to 8TB, but I only got the 6TB models in today. The Enterprise NAS series is designed for cloud-based systems and NAS application. They offer support for the use in systems with up to 16 drive bays which is a double up compared to what consumer NAS drives offer. It is very important to use a drive that is properly suited for your area of operation and not just pick any random cheap drive from the shelve. A farmer wouldn’t use an SUV to plow his fields either, it’s just not built for the task. So forget all about misleading Backblaze reports as the figures, features, and warranties speak for themselves here.

The 6TB Seagate Enterprise NAS HDD comes with 128MB cache and a spindle speed of 7200RPM. This is quite a bit more than the variable speeded drives that come with a maximum speed of 5400RPM. This makes the drives a little louder, but the Enterprise NAS HDD is surprisingly silent compared to other 7200RPM drives and only generates 2.5 bels during idle and 2.7 bels maximum during seek operations.

The average seek times are set to 8.5ms reading and 9.5ms writing. The performance is rated with up to 216MB/s sustained data rate and an average read/write rate of 154MB/s. You can run the drive in harsher environments as the Enterprise NAS HDD will work from zero to 70 degrees and can withstand up to 70Gs shocks at 2ms read and 40Gs at 2ms write. This 6TB version is built with 12 heads total for the 6 1TB disks it houses.

The Enterprise NAS drives have a long endurance and great workload ratings. The endurance is rated for 300TB a year and they have a 1.2 million hour mean time before failure rating. Seagate is also backing these drives with a 5-Year warranty and also offers optional 5-Year Rescue Data Recovery options.

The available Rescue Data Recovery Service options can save the day when the worst case scenario happens. It is an extra feature that you might want to consider when dealing with your important data. Any company is more or less lost when they lose their digital data. Seagate Recovery Services (SRS) can save the day in the following situations: RAID controller failure, Lost RAID configuration, accidental reconfiguration, accidental re-initialization of the RAID array, power surges that cause multiple drive failures simultaneously, missing RAID partitions, reformatted RAID partitions, virus damage, natural disaster, human error and drive failures. Most data can be recovered in-lab with a nearly 90% success rate.

The drives are built on customer proven technologies coupled with the newest density platters that allow for lower power consumptions, smaller overall footprint, and lower total cost of ownership over previous drive generations. The RV sensors provide strong reliable performance and the controller is flashed with NAS-optimized firmware for balanced reads and writes.

The drives naturally support ATA8 streaming commands, NCQ, and are performance tuned for RAID applications. On-the-fly ECC algorithms make sure that the data arrives as it should and S.M.A.R.T. allows you to check on the drives status and health.

The PCB of the Seagate Enterprise NAS 6TB HDDs is well protected and the HDD controller and motor controller both feature heat transfer pads to help them stay cool in hot environments. The 128MB cache on the HDD is provided by an SK Hynix chip.

Features:

  • Enterprise-class reliability and performance for cloud-based storage and NAS applications in 1- to 16-bay enclosures
  • 1.2 million hours MTBF for enterprise-class reliability
  • 300TB-per-year workload rating for mid-range NAS and cloud-based storage
  • Backed by the Seagate 5-Year Limited Warranty
  • 7200-RPM spindle speed performance
  • Double the cache size, 256MB multisegmented on 8TB capacity, 128MB on the other sizes
  • Dual-stage actuators to deliver precision seeks every time
  • SATA 6Gb/s interface for easy integration into NAS and RAID rackmount systems
  • RV sensor for sustained performance and reliability
  • Optional 5-year Rescue Data Recovery Service plan protects against data loss in NAS and RAID environments.

Specifications

The specifications are taken directly from the manufacturers homepage at the time of the review and might as such be subject to possible future changes.

Page: 1 2 3 4 5 6 7 8 9 10

Bohs Hansen

Disqus Comments Loading...

Recent Posts

COLORFUL Launches CVN B650M GAMING FROZEN AM5 Motherboards

Today Colorful Technology has launched two new AMD B650 motherboards under their CVN Gaming Frozen…

4 mins ago

Sharkoon Unveils SKILLER SGK40 Mechanical Gaming Keyboard

Sharkoon Technologies has today unveiled their SKILLER SGK40, a customizable mechanical gaming keyboard with edge…

45 mins ago

MSI MAG 274UPF E2 4K Ultra HD Monitor Coming Soon

MSI has just revealed their latest feature-packed gaming monitor, the MSI MAG 274UPF E2. It…

2 hours ago

Thermaltake Reveal New S250 TG ARGB Mid-Tower Case

Thermaltake has just revealed its latest addition to its already packed and awesome case collection,…

2 hours ago

No Man’s Sky Orbital Update Trailer Released

Hello Games continues its road to redemption with No Man's Sky, however, I'd say we're…

2 hours ago

Cooler Master Reveals TD500 MAX ATX Case

Cooler Master, one of the biggest names for PC cases and PC cooling has today…

3 hours ago