SilentiumPC Introduces Regnum RG1 Chassis with Dual-Chamber
Bohs Hansen / 3 years ago
Building a system on a budget can be tricky in some areas such as the power supply where you shouldn’t skimp out and the chassis where it can be hard to find one you like for the money you have available. If you like it simple and effective while not costing much at the same time, then the newly introduced Regnum RG1 might be worth a closer look.
The Regnum RG1 features a simple and clean exterior, an internal dual chamber design for cable management and looks, and plenty of space for large hardware parts – and all that for less than £24.00.
The large main chamber in the Regnum RG1 offers plenty of space for full-sized ATX setups. The seven expansion slots provide the ability to mount plenty of add-in cards such as graphics card with a length up to 380mm. The CPU cooler can be up to 160mm high, but that’s only relevant if you go for an air-cooling setup. There is a surprisingly good cooling ability with support for up to six 120mm fans and large radiators too. One 120mm fan is installed by default at the rear, three 120mm fans can be mounted on the front, and another two can be mounted on the PSU shroud.
The large CPU cutout should make cooler installation easy and there are plenty of cable routing options. We don’t see the rubber grommets usually found in higher-end cases, but costs have to be cut somewhere to offer an ATX-sized chassis with these options at such a low price. It will still allow you to build a great looking and clean system.
Other than the seven rear expansion ports, the chassis offers two external 5.25-inch bays, but they share the space with the top fan mounts, so it is an either or there. You can install two 2.5-inch drives as well as two 3.5-inch drives, so you won’t run out of storage anytime soon. Especially not if you couple that with M.2 or PCIe storage options.
You also get two front-faced USB 3.0 ports, a headphone jack, and a microphone jack for easy connectivity. Overall, a nice package for a low cost. Speaking of costs, the Silentium PC Regnum RG1 with an MSRP inc. VAT that’s only set to 31.00 EUR or 23.90 GBP. The US price, excl tax, is set to $27.50.
Would you consider a low budget chassis like the Regnum RG1 with all its features in your next build, or will you rather go for a more premium-styled chassis?