Featured

Silverstone SUGO SG09 Small Form Factor Chassis Review

As the box for the SG09 recommended a higher degree of assembly skill I was expecting this build to take a little longer than usual, so I set myself some extra time to do a really good job of it. In total it took me around 90 minutes to complete this build which is three times longer than most other chassis take me to complete. This is partly due to the cable management and installation procedure for the chassis and I literally followed the instruction book to the letter to ensure everything fit nicely, fortunate then that the booklet was well laid out and easy to understand. As you can see in the picture below this tiny chassis has taken our components with ample room to spare throughout, cable management is as well laid out as I could reasonably achieve.

The top air intake fan, rear exhaust fan, CPU cooler fan and of course our GTX 560 Ti fans all have plenty of room to breath within the chassis, there are little to no cables in the way and unobstructed airflow goes a long way to keeping your system cool and quiet.

The PSU extension cable can be seen here running from the back of the chassis to the front mounted PSU, the benefits of such a powerful GPU in a small system such as this are incredible as you’re no longer restricted by the power draw of high end add in cards or a power thirsty high end CPU.

Not only is the airflow unobstructed thanks to the cable management, but it has gone a long way to making the chassis interior highly presentable, it’s a shame this little chassis doesn’t have a side window.

Around the back you can really see the benefit of the shorter PSU cables, not to mention my extensive cable tidying, something that would need to be done should you wish to install drives in all six bays. I wouldn’t worry about space though as there is a surprising amount of room for tucking away excess cables, not forgetting the amount of extra room still left on the other side of the chassis.

With the side fan-mounting panel back in place you can see just how the fans can supply extra airflow almost directly to the graphics card fans, very handy if you plan on putting heavy workloads on your system and need to keep it as cool as possible.

The rear of the chassis looks neat and tidy and our GTX 560 Ti has plenty of breathing room thanks to the extra ventilation surrounding the expansion slots.

Page: 1 2 3 4 5

Peter Donnell

As a child still in my 30's (but not for long), I spend my day combining my love of music and movies with a life-long passion for gaming, from arcade classics and retro consoles to the latest high-end PC and console games. So it's no wonder I write about tech and test the latest hardware while I enjoy my hobbies!

Disqus Comments Loading...

Recent Posts

ThermalTake CTE T500 Air Tempered Glass Full Tower Case Black

The CTE T500 Air is a specially designed E-ATX full tower chassis from the new…

20 hours ago

ASUS AMD PRIME B650-PLUS DDR5 ATX Motherboard

ASUS Prime series motherboards are expertly engineered to unleash the full potential of AMD Ryzen…

20 hours ago

Seagate FireCuda 540 1TB M.2 PCIe Gen 5 NVMe SSD/Solid State Drive

Performance has a new name - FireCuda 540 SSD. With speeds up to 9,500 MB/s,…

20 hours ago

NZXT H6 Flow RGB White Compact Dual-Chamber Tempered Glass PC Case

The H6 Flow's innovative compact design emphasizes GPU cooling with a strategically angled front corner,…

20 hours ago

ASUS NVIDIA GeForce RTX 4080 SUPER 16GB ProArt OC Edition Ada Lovelace Graphics Card

Blur the lines between imagination, the digital world, and reality. The ProArt GeForce RTX™ 4080…

20 hours ago

Acer 29″ UWFHD 75Hz ZeroFrame FreeSync IPS Monitor K293C

The ACER K293C monitor is a 29-inch ultra-wide monitor that offers a full HD resolution…

20 hours ago