Supermicro X10DAX (Intel C612) Workstation Motherboard Review
Bohs Hansen / 3 years ago
Introduction, Specifications, and Packaging
Today I’m taking a look at a motherboard for those that need that extra bit of power behind the curtains for heavy workstation or server tasks. The Supermicro X10DAX is aimed at workstations, but it would work well as a basis for a server as well with the features at hand. In the end, as always, it comes down to what tasks the system has to perform.
Supermicro’s X10DAX is a dual CPU motherboard with plenty of memory and multi-GPU support. The motherboard supports up to 1TB ECC DDR4 2133MHz LRDIMM memory over its 16 DIMM memory banks as well as Triple-SLI setup or Quadro-SLI with dual-GPU graphics cards. Those who will use RDIMMs instead of LRDIMMs will be limited to 512GB maximum memory capacity.
The motherboard supports up to two processors from the Intel Xeon E5-2600 v3 family thanks to the Dual Socket R3 (LGA 2011). That means up to 18 cores and 45MB cache per processor which in return equals a lot of power. The chipset is the Intel C612 which by itself provides a lof of features and enhancements over the predecessor.
One of the unique features on this motherboard versus its brothers is the overclocking features thanks to the BCLK settings in the BIOS and Supermicro has dubbed this Hyper-Speed on their motherboards. This will allow you to get that extra power from your system when it is needed and if it is needed. A great bonus that surely will be appreciated by many of the people purchasing this motherboard. Next to the Hyper-Speed technology, the Supermicro X10DAX also includes Hyper-Turbo mode which allows more power to be delivered to the CPUs and thereby maximize the CPU Turbo Mode frequency.
Supermicro also made sure that the motherboard is Thunderbolt 2 ready, but that’s an optional add-on you’ll have to get. Since this is a workstation board, it also comes with an onboard sound card. It could, for example, get a pretty hard job to edit videos without sound. The Supermicro X10DAX provides onboard 7.1 channel HD audio for just that reason.
Storage connection isn’t a problem either and we don’t have to pay for an extra SAS controller here that we probably don’t need in a workstation. Ten SATA3 ports, of which two supports SuperDOMs, should be plenty for your storage needs. If you need more than that, you’ll most likely have a server located somewhere anyway and thus eliminating the need again. You also get a Type-A USB 2.0 connector on the motherboard, placed right next to the SATA connectors. Since the SATA3 ports are controlled by Intel’s C612 chipset, we have RAID 0, 1, 5, and 10 at our disposal on this board.
Dual Gigabit LAN is included thanks to a couple of Intel i210 network controllers, but we don’t find any dedicated IPMI on this motherboard. The PCI Express connectors available are three PCI-E 3.0 x16, two PCI-E 3.0 x8, and one PCI-E 2.0 x4 (in x8).
With such an amount of power at our disposal, we also need proper cooling. The Supermicro X10DAX has eight 4-pin fan headers that support tachometer monitors, status monitoring, and PWM fans. There are no dedicated CPU fan headers, so you can use any two of the eight for that.
The specifications are taken directly from the manufacturers homepage and are as such subject to change in possible future revisions.
- Supports Hyper-Speed
- Supports 3-way Geforce SLI
- Supports 4-way SLI support with dual GPU graphics cards
- Dual socket R3 (LGA 2011) supports Intel Xeon processor E5-2600 v3 family; QPI up to 9.6GT/s
- Intel C612 chipset
- 16x DIMM slots for up to 1TB ECC DDR4 2133MHz memory
- 3 PCI-E 3.0 x16, 2 PCI-E 3.0 x8, and 1 PCI-E 2.0 x4 (in x8) slot
- Intel i210 Dual port GbE LAN
- 10x SATA3 (6Gbps) ports (RAID 0, 1, 5, 10)
- 6x USB 3.0 (4 rear, 2 via header), 5x USB 2.0 (2 rear, 2 via header, 1 Type A)
- 7.1 HD Audio with optical S/PDIF
Packaging and Accessories
The box for the Supermicro X10DAX is a default layout for the entire line-up and as such presents key features from all boards. While we can spot such things as 40GbE here, we won’t find it on this board.
The rear of the box details the different boards from Supermicro in this category for easy comparison.
Inside the box, next to the motherboard itself, we find six SATA3 cables and an IO shield with proper padding and yet unopened ports. Remember to only pop the ones that the motherboard actually has.
Included is also a Quick Start Guide that will show you the headers and jumper positions, how to install your memory depending on the amount of modules you are using, as well as front header layout and other vital information for installation.