Thermaltake Core P5 TI Edition Chassis Review

A Closer Look – Components Continued

So, back to take a look at the main chassis component again. With six thumbscrews, you can open up the back panel to dive into the interior. Here you’ll find two more boxes of components, as well as the rear panel dust filter.

The wiring loom for the front I/O is here. However, this space is handy for the radiator/storage bracket too.

Towards the top, you’ll find three HDD bays with removable brackets. This one annoys me, as they cover the bulk of important routing grommets. You can remove them, but what if you need the storage bays? I don’t know, I think TT could have moved these a bit to make life easier.

In those component boxes, you’ll find rubber feet for horizontal mounting. There’s a few extra HDD bays and mounts for SSDs too. You’ll also find Y-split USB cables, screws, and all the usual fittings.

Then you have water cooling bracket fittings, more storage mounts, the PCIe expansion bracket, PSU mounting bracket, GPU riser cable and bracket. The list goes on. I’m bored of boxes of parts, so let’s get this beast built and see what it looks like put together!