There are many ways to test a storage drive, and we have chosen to include close to every test possible. We will start with a typical benchmark analysis of the formatted drive with various village scenarios. A mechanical drive will have to move its read-heads over the surface to reach the data location, and that has a natural impact on the performance. To see the impact it might have, the drive will be tested empty as well as with 25%, 50%, and 75% space usage. For these tests, we will be using Anvil’s Storage Utilities, AS SSD Benchmark, ATTO Benchmark, and CrystalDiskMark.
Besides these synthetic fill tests, the drive is tested with PCMark 8’s storage benchmark to get real-world performance results. The rest of the system’s hardware has a bigger impact on this benchmark than other benchmark apps. But it is another point of comparison. These tests are run on an empty drive.
Following the fillage tests, the partition gets removed, and we check the drive’s raw performance. These tests will determine the hardware’s capabilities while eliminating any interference from the set file system. AIDA64’s storage benchmark and IOmeter are both great tools for this, and they help us paint an even clearer picture of the drive. The IOmeter tests I run are quite different from the rest as they will give a final result after a longer performance test rather than a maximum or average score; this gives us yet another view of the tested drive over the regular tests.
Maximize cooling potential with DeepCool FK120 fans that are balanced to perfection for both performance…
Full ARGB front panel with dual ventilation cut-outs The front panel can be replaced with…
Enhanced Power Loss Data Protection Enhanced Power Loss Data Protection prepares the SSD for unexpected…
Medion Erazer Gear up for battle with the MEDION ERAZER Beast X40 Gaming Laptop and…
Coiled keyboard cable with professional, expert sleeving USB Type A to USB Type C powder…
HERO ST gaming chair with harness hole Upholstered with high-tech vinyl and dense cold foam…