SanDisk Announces Z400s SATA SSD
Bohs Hansen / 2 years ago
SanDisk latest SSD, the new Z400s, is aimed more at the replacement of mechanical hard drives in embedded systems than home systems, but that doesn’t mean you can’t use it.
The new SanDisk Z400s is available in multiple form factors and capacities. Whether you need a 7mm high 2.5-inch drive, an M.2 2242 and 2280, or an mSATA form factor, SanDisk has it covered. Capacity wise it starts at 32GB and tops out at 256GB.
The sequential performance is rated at 549MB/s reading and 330MB/s writing while the random performance is rated to 33K read and 62K write.
The Z400s strength lies in power consumption where it only draws 50 mW during active power, 20mW in slumber mode and less than 5mW with DEVSLP.
The endurance is rated to 20TB total bytes written for the 32GB, 40TB for the 64GB, and 72TB for the 128GB and 256GB models and all models are backed by a three-year warranty.
There are many areas where this drive could come in handy, from Digital Signage over POS to Security-Surveillance. Effectively anywhere you need fast storage that doesn’t draw a lot of power nor generates much heat. An SSD beats a traditional HDD on every of those aspects and also in reliability.
The new SanDisk Z400s is sampling with customers immediately in all form factors and all capacities.