Buffalo Technology has made two new models of external hard drives available running on the 5GB/s USB 3.0 interface, the drives will be available in three capacities:
The drives will be stored in Buffalos “WorkHorse” enclosure which measures up at 39 x 123 x 189 mm. The drives as mentioned run on USB 3.0 which has a potential maximum bandwidth of 5GB/s or 625MB/s but it is unlikely that a mechanical hard drive will ever come close to those data transfer speeds so bottlenecking should not be an issue at all.
A bundled software program called “eco manager” allows the drive to spin down when idling which results in up to 70% power consumption. Note here that these drives are powered by sepatate DC adaptor power bricks not through the USB 3.0 connection since it cannot provide enough power for a fully fledged hard drive to function properly. The whole unit itself is fitted with noise dampening material to prevent the hard drive vibrations causing a disturbance and the enclosure also has its own small fan for some ventilation.
The CYCLEDESK 100 is not just an ordinary gaming desk, it is designed for a…
The NZXT Lift 2 is an symmetrical mouse that goes the distance. Its lightweight design…
The MAG B650 TOMAHAWK WIFI is a gaming oriented ATX motherboard constructed around the latest…
Experience incredible performance, visuals, and efficiency when gaming and streaming with the AMD Radeon™ RX…
Welcome to the new era of performance. AMD Ryzen 7000 Series ushers in the speed…
Take a step into the future with the Z790 Gaming Plus Wifi motherboard, designed and…