CM Storm Enforcer Chassis Review

Exterior
The case is off standard size for a medium-sized chassis coming in at 229×484.5×523.5 mm. The overall look oozes with quality and has some fantastic unique looks.

Half of the front is implemented by a door which opens up to reveal the cases drive bays.

With the door open, you will have room to put in four 5.25" drives for your various optical drives or have the ability for one of the bays to be used with the 5.25" to external 3.5" adapter leaving 3 bays available for any optical drives though most consumers will only use one of these bays.

On the top is a panel for the front panel buttons and connectors. Besides the power button, there are two USB 2.0 and two USB 3.0 connectors, microphone and headphone 3.5mm jack plugs and a reset button hidden behind the door. Also on the top is where you will find the LEDs for power and activity.

The side panel includes a half-sized window to show off your installed hardware.

The rear of the case shows that the power supply is in the usual place at the bottom and there are three grommet covered holes for water cooling tubes to pass through.

The top of this case has room for a 200mm fan or if preferred you can install two 120mm fans and this depends entirely on your preference.