Corsair MP400 2TB M.2 NVMe SSD Review

It has been a while since I had the pleasure to review a storage drive from Corsair, so it is a pleasure to have the MP400 SSD in the office today. The Corsair MP400 is a classic M.2 2280 drive which is built with QLC NAND. The MP400 is available from 1TB to 8TB, but I’m testing the 2TB version today.

Corsair MP400 NVMe SSD

Corsair is going for the affordable high-density area with the MP400, offering impressive capacity options. The 2TB NVMe SSD which I have in the office today can be considered moderate as the series is listed with up to 8TB capacity. It isn’t even that long ago that 2TB on a standard M.2 2280 module was impressive, now we have up to four times that available.

The drive series is built with two different controller chips. The smaller 1TB and 2TB versions come with the Phison E16 while the 4TB and 8TB are built around Phison’s E12S controllers. It doesn’t come as a big surprise that the E12S is user there and it is the same which we previously saw on the Rocket Q. It is currently the only controller small enough to allow up to 8TB on such a small form factor. In both cases, the controller is coupled with Micron’s 96-layer QLC NAND which allows a lot of capacity on a small areal. The drive also features a bit of DDR4 cache in order to boost the performance.

Feature-wise, you get what you need in a drive such as DevSLP and 256-bit AES encryption possibilities.

Performance and Endurance

The performance varies a bit depending on the capacity. This 2TB model delivers a sequential performance of up to 3480MB/s when reading and 3000MB/s when writing. The random performance comes in at 380K IOPS when reading and 560K when writing. The larger drive versions deliver the same sequential performance, but the random performance increases to 610K IOPS reading and 710K writing.

Corsair backs the MP400 with a 5-year warranty and it comes with a TBW rating of 200TB per 1TB capacity. That makes this 2TB model come in at a TBW rating of 400TB. It also features a 1.8 million hours MTBF.

What Corsair Does Have To Say?

“A lightning-fast performance. Experience data speeds up to 3,400MB/s sequential read and 3,000MB/s sequential write speeds, many times faster than traditional SATA SSDs.

High-Density 3D QLC NAND offers even better value than the previous generation TLC NAND, storing more data in the same amount of physical space.”

You can read more about the drive and its details on the official product page and series page.

Feature Highlights

  • Available from 1TB to 8TB
  • Standard 2280 M.2 form factor for maximum compatibility
  • Affordable large-capacity SSD storage thanks to QLC NAND
  • 5-Year Warranty
  • Black PCB and sticker for simple colour matching

Page: 1 2 3 4 5 6 7 8 9 10 11

Bohs Hansen

Disqus Comments Loading...

Recent Posts

Valve Confirms Initial Steam Deck Drops Still on Track for February

While originally scheduled to start shipping last month, Valve's upcoming Steam Deck was delayed until…

7 hours ago

AMD Prepares ‘RAMP’ – Their DDR5 XMP Memory Profile Solution?

I don't think it would be unfair of me to say that while AMD Ryzen…

7 hours ago

Tesla Cybertruck Now Delayed into 2023?!

Originally launched back in late 2019, the Tesla Cybertruck certainly grabbed a lot of attention…

7 hours ago

Genesis Launches the Irid 505 White ARGB PC Case

Genesis has announced the launch of its new Irid 505 White ARGB midi tower PC…

7 hours ago

Nvidia Delays the 3090 Ti Over Hardware/BIOS Issues?

Despite confirming the upcoming and long-rumoured 3090 Ti graphics card at their CES 2022 keynote…

8 hours ago

Sony Withdraws PS Now Cards Hinting Again at a New Subscription Service

While the Sony PS5 has undoubtedly proven to be the bigger winner in the current…

1 day ago