Corsair Vengeance C70 Mid-Tower Gaming Chassis Review

So now that we have the side panel off we can get a good look at what is going on inside this chassis.  As you can see we have 3 x 120mm fans installed, two in the front and one at the back, 2 medium sized cable management slots and one large one further down towards the power supply.  Across the back we have a very large cutaway to help with installation of a CPU cooler, 6 quick release hard drive bays and 3 x optical quick release drive bays.

The three optical drive bays have a metal push panel for locking the drives in place, meaning the drives clip in automatically when you slot them in and you just need to press on the side panel to release them.  Below that we can better see the 2 x 120mm corsair fans mounted on two 3 bay hard drive cages, both of which are removable, allowing you to install a further two fans in the front or an extra fan in the bottom of the chassis.

In the back of the case you can see the 8 expansion slots, all are fitted with easy to use thumb screws, very handy when you need to quickly swap out a component.

There is just as much going on around the back of this case too, the most obvious being the clips for holding your cables, which are completely removable, but they are a very handy thing to have, you’ll also notice there are tie down points everywhere, perfect for locking down excess wires with some cable ties.