We continue to update our testing methods around once per year. As such, we re-test older hardware to reflect changes over time. These can be driver updates, Windows updates, game patches, and more; all of which have an impact on performance figures. Furthermore, we update our test bench to newer and more relevant hardware. This means that our new reviews aren’t always comparable to those of older reviews, so please compare the testing methodology on older reviews should you be trying to compare them with newer ones.
When it comes to our benchmarks in our reviews, the benchmarks are pretty self-explanatory and kept as simple as possible, although there are a few exceptions. Remember that your choice of graphics card, CPU, the silicon lottery, and other factors can yield different numbers, and there’s always a margin for error when using any software.
Links are provided below, as well as the settings we use. We encourage you to not just look at how one product compares to any other, but how it compares to your own. If you’re looking to build a new system, you should benchmark your current PC using the benchmarks available to you. You should then look at the percentage improvement from your current hardware to the hardware tested here to give you a ballpark figure of how much of an upgrade this will provide you with.
To gauge performance levels which are easily reproduced time after time, by both ourselves and our readers, we now stick strictly to games default profiles. With our previous reviews, we used the “Medium or Normal” preset. However, as GPUs get faster, we’ve now moved that up to “High” profiles for all games, at all resolutions. V-Sync is always disabled in our testing, as is FreeSync and G-Sync technologies or similar. Graphics card power usage set to optimised or balance, and the system power mode set to High Performance within Windows and the available GPU driver software. Identical settings are used for all resolutions unless otherwise stated.
Everyone has a reasonable noise level preference when it comes to comes to components on a computer. Some can handle all fans at 100% load to keep temperatures down; some want an entirely silent computer. To accurately gauge the noise output of a graphics card, we position a Precision Gold N05CC one meter above our open-air test bench and take an average reading at idle and load. Gaming noise levels are taken during a CPU vs CPU match a preset match in Soul Calibur VI.
We take power readings during idle state with no background applications running. Then again at 50% completion of the Unigine Superposition benchmark, using the average as the final published result. Gaming power consumption is taken during a CPU vs CPU match a preset match in Soul Calibur VI.
We take temperature readings after 10 minutes of desktop idle with no background programs running, then take the recorded maximum delivered from Unigine Superposition after a 4K optimised run, confirming the numbers are accurate with HWMonitor. Furthermore, the ambient temperature is always kept +/- 1c from 21c. Gaming temperatures are taken during a CPU vs CPU match a preset match in Soul Calibur VI.
High-Performance Air Cooler with six 6mm heat pipes and a copper cold plate for high-efficiency…
Experience an outstanding performance and exceptional toughness with the ASUS TUF K1 RGB Gaming Keyboard.…
Every time you turn on your computer, you’re using your storage drive. It holds all…
Take your tunes on the go with the powerful JBL Flip Essential 2. Bad weather?…
I genuinely didn't see this one coming, in fact, I'm not even remotely sure how…
MADFINER Games is a globally recognised Czech independent game studio that has recently released a…