The Raspberry Pi Foundation recently released the latest iteration of its credit card-sized mini computer, the Raspberry Pi 3, to glowing reviews, praising its improved speeds and onboard WiFi and Bluetooth 4.1, but on reddit user has noticed that, under certain circumstances, the board might be prone to serious overheating problems, with temperatures approaching 100oC.
Reddit user ghalfacree posted a photo of his Raspberry Pi 3 (above), taken with a calibrated Flir thermal camera, which showed that the computer’s BCM2837 SoC hit temperatures of 97.3oC.
“The new BCM2837 system-on-chip gets far, far hotter than its predecessors,” ghalfacree wrote on reddit. “This image was taken using a calibrated Flir thermal camera while the Pi 3 had been at 100% CPU load – but no GPU load – for five minutes, and registered nearly 100°C (212°F). I confirmed the temperature with a K-type contact probe, and also by poking the chip.”
“Don’t poke the chip. It hurts,” ghalfacree added.
“I’d recommend picking up a small heatsink for the Pi 3, the first Pi that I’d actually say is worth doing so, and if you’re reusing an existing case keep an eye on the temperature – you may need to make a cut-out to increase the ventilation, especially if you’re using an enclosed slice-style case like the original-design Pimoroni PiBow (which has been modified with a heatsink cut-out specifically for the Pi 3.)”
“Oh, and don’t trust the built-in thermal sensor: when that picture was taken, the internal sensor was happily reporting sub-80°C (176°F) temperatures,” ghalfacree warned.
In response to the post, Raspberry Pi 3 co-creator Eben Upton assured customers that they should not experience overheating issues under normal operating conditions, and the reddit post in question was regarding stress testing.
“[C]o-creator of the board Eben Upton has said that – outside of synthetic tests that place the board’s processor under prolonged strain – the Pi 3 is highly unlikely to behave in this way,” ZDNet reports.
“Don’t poke the chip. It hurts”
No shit, Sherlock.
it overheats under normal working conditions. One browser open with Skype. Nothing else.
So how many session can I open?
I can’t even run a system update (sudo apt-get upgrade), it hangs.
I added heatsinks to avail, very very hot. I just stops at some point.
I ordered a case with a fan with some holes, I hope this will be a remedy, otherwise I’ll be sending it back (the PI of course) . There is no point with this version of the PI if it crashes after 5 minutes of using.