To test voltage regulation we load the power supply to five different load scenarios that give an equal spread of load across every single rail. So that means 20% on all rails, 40% on all rails and so on. We then calculate the average deviance of each rail from its expected voltage.
Power efficiency is measured by calculating actual supplied wattage divided by the wattage drawn at the wall/plug, multiplied by 100 to give a percentage. We then compare that to the particular 80 Plus certification the company claims to see if it meets that. You can see the 80 Plus certifications below, we always test 230v power supplies.
Power Factor Correction is the ratio of the real power flowing to the load, to the apparent power in the circuit. The aim of PFC is to make the load circuitry that is power factor corrected appear purely resistive (apparent power equal to real power). In this case, the voltage and current are in phase and the reactive power consumption is zero. The closer the number to one the better as this allows the most efficient delivery of electrical power (Source – Wikipedia).
ENHANCED CPU COOLING - The MAG CORELIQUID E-Series utilizes an enlarged copper cold plate for…
4.71138E+12 Item Weight: 1.5 kg Model Number: V513-274R Was £599.99 Now £524.99 Keep up with…
Connect. Control. Command: The CORSAIR iCUE COMMANDER CORE XT turns your case into a smart…
I love original games and concepts, but every now and then, taking the best elements…
I must admit that while I loved Starfield, I got about 30 hours in and…
There's no shortage of cheap Bluetooth speakers, but if you're looking for something more premium,…