When testing in a power supply laboratory it is difficult to take fan noise readings as the noise from the Chroma corrupts everything. The next best thing in our circumstances was reading off the fan speed with a tachometer to get an idea for the noise. In the Enermax Europe PSU lab we had to do exactly that and we recorded the fan speed at each load scenario. The ambient temperature during testing held constant at 26 degrees, with 1 degree of variation. Each power supply had a consistent time period of 5 minutes to stabilise between each load scenario.
In my experience the following general relationships apply between noise levels and fan speeds, though it can vary greatly between the type of fan used.
Sabrent make a lot of high-end products, so we're pretty excited to get their latest…
Overwhelm your senses with 55" large screen & 1000R curvature Swing into groundbreaking views with…
DisplayDisplay Size34.18"Display Size (cm)86.82 cmDisplay ResolutionUWQHD (3440 x 1440 Pixel)Display Aspect Ratio21:9Display Refresh Rate170 HzDisplay…
The flagship ROG Ryujin II all-in-one cooler delivers ultimate thermal performance for gamers looking for…
A NEW ERA OF DeepCool Built on our 4th Generation high-performance water pump that maximizes…
Peripheral FeaturesMakro supportYesSensorSensor TypeopticalDPI adjustableYesMax. DPI26000 DPIConnectivityWired / WirelessWiredConnection TypeBluetooth, 2.4 Ghz WirelessErgonomicsMouse layoutright-handedWeight adjustableNoLightingLightingYesLighting…