When testing in a power supply laboratory it is difficult to take fan noise readings as the noise from the Chroma corrupts everything. The next best thing in our circumstances was reading off the fan speed with a tachometer to get an idea for the noise. In the Enermax Europe PSU lab we had to do exactly that and we recorded the fan speed at each load scenario. The ambient temperature during testing held constant at 26 degrees, with 1 degree of variation. Each power supply had a consistent time period of 5 minutes to stabilise between each load scenario.
In my experience the following general relationships apply between noise levels and fan speeds, though it can vary greatly between the type of fan used.
The 990 EVO offers enhanced sequential read/write speeds up to 5,000/4,200 MB/s, and random read/write…
High-Performance Air Cooler with six 6mm heat pipes and a copper cold plate for high-efficiency…
Experience an outstanding performance and exceptional toughness with the ASUS TUF K1 RGB Gaming Keyboard.…
Every time you turn on your computer, you’re using your storage drive. It holds all…
Take your tunes on the go with the powerful JBL Flip Essential 2. Bad weather?…
I genuinely didn't see this one coming, in fact, I'm not even remotely sure how…